Supply> Supply of steel straightening and cutting machine Supply of steel straightening and cutting machine Information Name: Supply of steel straightening and cutting machine Published: 2012-03-16 Validity: 30 Specifications: Quantity: 0.00 Price Description: Negotiable Detailed Product Description: The relevant provisions of the restructuring for the Luoyang Hong special machinery and equipment Limited. The company mainly for the steel straightening cutting machine manufacturing sales, machinery and equipment overhaul, non-standard equipment manufacturing. The company is strong in technology, well-equipped, high technical staff quality. The company developed high-efficiency steel straightening cutting machine has reached the advanced level of similar foreign products, high efficiency, good quality, by domestic and foreign steel dealers, steel welded wire mesh production enterprises, steel distribution centers and other users of praise. Products have been exported to Laos Myanmar Southeast Asia, Taiwan and Europe. Welcome friends from all walks of life patrons, visit the guide.

Reinforcement Straightening Cutters for more information
Brand: Hunt
Straightening Straightening Machine Model: GT5 / 10TW Type
Product alias: straightening machine straightening machine
Product use: steel straightening and cutting cut 8-1
Reinforcement Straightening Cutter Type: Steel Cutting Machine
Whether to provide custom processing: Yes

Safety Technology of Straightening and Straightening Machine
(1) When installing the receiving frame, the centerline of the trough chute shall be aligned with the center line of the guide bobbin, the straightening cylinder and the lower cutter hole.
(2) After installation, you should first check the electrical system and other components for damage, whether the machine is connected to a solid and reliable parts, the transmission part is flexible. Confirm that the parts are normal before they can be commissioned. Test run should check the bearing temperature, see the hammer, cutter and shear gear and other parts are normal. Confirm that no abnormal condition, before feeding, test straight and cut off.
(3) according to the need to straighten the diameter of the bar, choose the appropriate straight block, traction wheel groove and transmission speed. Adjust the diameter of the block should be larger than the diameter of steel bars 2mm ~ 5mm, traction wheel groove width, and should be required to straighten the diameter of the bar coincide.
(4) must pay attention to adjust the straight block. Adjust the simple, usually with five straight block, the first 1,5 two straight block to be placed on the center line, the middle three can be off the center line. First, the offset of about 3mm offset, after the test straight, such as steel is still slow bending, can gradually increase the offset until straightening.
(5) guide the front of the tube, should be installed a length of about 1m steel pipe. Need to straighten the steel should first pass through the pipe, and then penetrate the guide tube and adjust the barrel to prevent each plate near the straightening of the steel head when the end of the pop-up wounding.
(6) in the straight block is not fixed, the cover is not covered before, shall not penetrate the steel bar, to prevent the machine after the straight block to fly out of injury.

Product features of steel straightening and cutting machine
1. Fast: the machine's maximum cutting speed of 136 m / min, is the current homemade machine 3-4 times.
2. Length steel straightening and cutting machine registration: outstanding feature of this machine is the dimensional accuracy of the quasi cut length error of ≤ ± 1mm
3. Straightening accuracy: Straightening straight after the straightness of ≤ 2mm / m, higher than the accuracy of similar machines.
4. Can be shortened steel: the shortest control of the length of only 0.8 meters, is the current domestic machines can not be achieved. This is particularly useful for enterprises that produce steel wire mesh.
The steel wire straightening and cutting machine for all kinds of: straightening the unique part of the machine, suitable for hot rolling / cold rolling / light circle / with various wire reinforcement ribs.
6. Intelligent control: The machine uses a programmable controller (PLC) for control, operation, adjustment is simple and reliable.
7. Low failure rate: As the parts processing fine, strict quality control, so the installation and commissioning, under normal working conditions, long-term maintenance without delay.

Steel straightening and cutting machine Products